View SZ5A91_1320773.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com
SZ5A2.4 thru SZ5A200
500mW and 800mW 2.4 - 200 VOLTS ZENER DIODES
DESIGNER'S DATA SHEET
FEATURES:
Hermetically Sealed in Glass Axial Lead Rated at 500 mW Surface Mount Rated at 800 mW Available in Axial (L), Round Tab Surface Mount (SM) and Square Tab Surface Mount (SMS) Versions Available to TX, TXV, and Space Levels 5/ Available in 10% and 5% Tolerances. For other Voltage Tolerances, Contact Factory.
Maximum Ratings Nominal Zener Voltage Zener Current Continuous Power
L SM, SMS L SM, SMS
Symbol
Value
Units
VZ IZM PD Top, Tstg RJL RJE RJA
2.4 - 200 2.2 - 198 3.3 - 297 500 800 -65 to +175 250 150 300
V mA mW C C/W AXIAL (L)
DIM A B C D
MIN. .060" .120" 1.00" .018"
MAX .090" .200" --.022"
All dimensions are prior to soldering
Operating and Storage Temp.
Thermal Resistance, Junction to Lead, L=3/8" (for L) Junction to End Cap (for SM, SMS) Junction to Ambient (for All)
Part Number/Ordering Information 2/
SZ5
__ __

__ __
Screening
5/
__ = Not Screened TX = TX Level TXV = TXV S = S Level
DIM A B C D
MIN. .057" .130" .010"
Body to Tab Clearance: .001"
MAX. .067" .146" .022"
Package Type L = Axial Leaded
SM = Surface Mount Round Tab SMS = Surface Mount Square Tab
4/
ROUND TAB (SM)
All dimensions are prior to soldering
Voltage/Family
2.4 thru 200 = 2.4V thru 200V, See Table on Page 2
Voltage Tolerance
A = 10% Voltage Tolerance B = 5% Voltage Tolerance
DIM A B C D MIN. .070" .175" .023"
Body to Tab Clearance: .001"
MAX. .078" .210" .027"
SQUARE TAB (SMS) All dimensions are prior to soldering
NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: Z00002B
DOC
Solid State Devices, Inc.
PART
Nominal Zener Voltage 1/ VZ @ IZT Volts
2.4 2.5 2.7 2.8 3 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.0 6.2 6.8 7.5 8.2 8.7 9.1 10 11 12 13 14 15 16 17 18 19 20 22 24 25 27 28 30 33 36 39 43 47 51 56 60 62 68 75 82 87 91 100 110 120 130 140 150 160 170 180 190 200
SZ5A2.4 thru SZ5A200
Maximum Reverse Leakage Current IR @ VR A
100 100 75 75 50 25 15 10 5 5 5 5 5 5 3 3 3 3 3 3 2 1 0.5 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Electrical Characteristics @ 25C (Unless Otherwise Specified)
NUMBER 6/
Voltage Tolerance 10%
SZ5A2.4 SZ5A2.5 SZ5A2.7 SZ5A2.8 SZ5A3 SZ5A3.3 SZ5A3.6 SZ5A3.9 SZ5A4.3 SZ5A4.7 SZ5A5.1 SZ5A5.6 SZ5A6 SZ5A6.2 SZ5A6.8 SZ5A7.5 SZ5A8.2 SZ5A8.7 SZ5A9.1 SZ5A10 SZ5A11 SZ5A12 SZ5A13 SZ5A14 SZ5A15 SZ5A16 SZ5A17 SZ5A18 SZ5A19 SZ5A20 SZ5A22 SZ5A24 SZ5A25 SZ5A27 SZ5A28 SZ5A30 SZ5A33 SZ5A36 SZ5A39 SZ5A43 SZ5A47 SZ5A51 SZ5A56 SZ5A60 SZ5A62 SZ5A68 SZ5A75 SZ5A82 SZ5A87 SZ5A91 SZ5A100 SZ5A110 SZ5A120 SZ5A130 SZ5A140 SZ5A150 SZ5A160 SZ5A170 SZ5A180 SZ5A190 SZ5A200
Zener Test Current IZT mA
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 9.5 9.0 8.5 7.8 7.4 7.0 6.6 6.2 5.6 5.2 5.0 4.6 4.5 4.2 3.8 3.4 3.2 3.0 2.7 2.5 2.2 2.1 2.0 1.8 1.7 1.5 1.4 1.4 1.3 1.1 1.0 0.95 0.90 0.85 0.80 0.74 0.68 0.66 0.65
Maximum Zener Impedance 3/ ZZ @ IZT ZZK@IZK Ohms
30 30 30 30 29 28 24 23 22 19 17 11 7 7 5 6 8 8 10 17 22 30 13 15 16 17 19 21 23 25 29 33 35 41 44 49 58 70 80 93 105 125 150 170 185 230 270 330 370 400 500 750 900 1100 1300 1500 1700 1900 2200 2400 2500 1200 1250 1300 1400 1600 1600 1700 1900 2000 1900 1600 1600 1600 1000 750 500 500 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 600 700 700 800 900 1000 1100 1300 1400 1400 1600 1700 2000 2200 2300 2600 3000 4000 4500 4500 5000 5500 5500 6000 6500 7000
Typical Temperature Coefficient TC @ IZT %/ C
-0.085 -0.085 -0.080 -0.080 -0.075 -0.070 -0.065 -0.060 +0.055 +0.030 +0.030 +0.038 +0.038 +0.045 +0.050 +0.058 +0.062 +0.065 +0.068 +0.075 +0.076 +0.077 +0.079 +0.082 +0.082 +0.083 +0.084 +0.085 +0.086 +0.086 +0.087 +0.088 +0.089 +0.090 +0.091 +0.091 +0.092 +0.093 +0.094 +0.095 +0.095 +0.096 +0.096 +0.097 +0.097 +0.097 +0.098 +0.098 +0.099 +0.099 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110 +0.110
Max. Continuous Current Axial IZM mA
198 182 168 162 152 138 126 117 106 97 89 81 76 73 67 61 55 52 50 45 41 38 35 32 30 28 27 25 24 23 21 19 18 17 16 15 14 13 12 10.6 9.7 8.9 8.1 7.6 7.3 6.7 6.1 5.5 5.2 5.0 4.5 4.1 3.8 3.5 3.2 3.0 2.8 2.7 2.5 2.4 2.2
Surface Mount IZM mA
297 273 252 243 228 207 189 175.5 159.0 145.5 133.5 121.5 114.0 109.5 100.5 91.5 82.5 78.0 75.0 67.5 61.5 57.0 52.5 48.0 45.0 42.0 40.5 37.5 36.0 34.5 31.5 28.5 27.0 25.5 24.0 22.5 21.0 19.5 18.0 15.9 14.55 13.35 12.15 11.40 10.95 10.05 9.15 8.25 7.80 7.50 6.75 6.15 5.70 5.25 4.80 4.50 4.20 4.05 3.75 3.60 3.30
VR- 10% Volts
0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 0.95 1.9 1.9 2.9 3.3 3.8 4.8 5.7 6.2 6.2 6.7 7.6 8.0 8.7 9.4 9.5 10.5 11.4 12.4 13.3 13.3 14.3 16.2 17.1 18.1 20 20 22 24 26 29 31 34 37 41 44 45 49 53 59 65 66 72 80 86 94 101 108 116 116 130 137 144
VR- 5% Volts
1 1 1 1 1 1 1 1 1 2 2 3 3.5 4 5 6 6.5 6.5 7 8 8.4 9.1 9.9 10 11 12 13 14 14 15 17 18 19 21 21 23 25 27 30 33 36 39 43 46 47 52 56 62 68 69 76 84 91 99 106 114 122 129 137 144 152
5%
SZ5B2.4 SZ5B2.5 SZ5B2.7 SZ5B2.8 SZ5B3 SZ5B3.3 SZ5B3.6 SZ5B3.9 SZ5B4.3 SZ5B4.7 SZ5B5.1 SZ5B5.6 SZ5B6 SZ5B6.2 SZ5B6.8 SZ5B7.5 SZ5B8.2 SZ5B8.7 SZ5B9.1 SZ5B10 SZ5B11 SZ5B12 SZ5B13 SZ5B14 SZ5B15 SZ5B16 SZ5B17 SZ5B18 SZ5B19 SZ5B20 SZ5B22 SZ5B24 SZ5B25 SZ5B27 SZ5B28 SZ5B30 SZ5B33 SZ5B36 SZ5B39 SZ5B43 SZ5B47 SZ5B51 SZ5B56 SZ5B60 SZ5B62 SZ5B68 SZ5B75 SZ5B82 SZ5B87 SZ5B91 SZ5B100 SZ5B110 SZ5B120 SZ5B130 SZ5B140 SZ5B150 SZ5B160 SZ5B170 SZ5B180 SZ5B190 SZ5B200
NOTES: 1/ All zener voltages are measured with an automated test set using a 35 msec test time. Longer or shorter test time will have a corresponding effect on the measured value due to heating effects. 2/ For Ordering Information, Price, Operating Curves, and Availability- Contact Factory. 3/ Zener impedance is derived from the AC voltage divided by the AC current with RMS value of 10% of DC zener test current superimposed on the test current. 4/ SSDI standard marking consists of a contrasting color cathode dot or band. Part number information is included on packaging labels. 5/ Screened to MIL-PRF-19500. 6/ Suffix "L" for Axial, "SM" for Round Tab Surface Mount, and "SMS" for Square Tab Surface Mount. Data Sheet Z00002B

▲Up To Search▲

Price & Availability of SZ5A91

	To Download SZ5A91 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .